Page 28
PROGRAMMING
Programming via
e-stant
software
It is possible to program Helpy 2W-Q via computer by using the USB/serial
proprietary cable and the dedicated
e-stant
software.
e-stant
software also allows to:
- update the firmware of the Helpy 2W-Q
- customize the messages of the Helpy 2W-Q
- set a micro SD card to use for programming, customizing the messages and
updating the firmware of the Helpy 2W-Q.
e-stant
can be downloaded at the following link:
https://www.esse-ti.it/en/download/software-request
Programming via micro SD card
The micro SD card properly set allows to:
- program the Helpy 2W-Q
- update the firmware of the Helpy 2W-Q
- customize the messages of Helpy 2W-Q.
To use of the micro SD card see the relating instructions.
