Esse-ti FlyDect User Manual Download Page 70

70 

ENGLISH

 

Using the Menu  

The phone is menu driven, to make selections in the menu you use the 2 keys 
below the display. The function of each key can change but is shown above on 
the display. (Soft-keys). 

 

To enter the Menu, press the ‘Menu’ button (R Function 

Key). 

 

 

 

 

You are now able to scroll through the menu by using 

the Up and Down Keys.  

 

The ‘OK’ button (L Function Key) is almost every time 

used to confirm a setting or to enter a sub menu. 

In the manual, only the function of the Soft Key will be mentioned. 

Handset Display Language 

You can select 9 different display languages: 

 

Press ‘MENU’ key  when the unit is in standby mode. 

 

 

 

 

Select 

CONFIG HS

 by using the UP and DOWN keys. 

 

Press ‘OK’  to confirm. 

 

 

 

 

Select 

LANGUAGE

 by using the UP and DOWN keys. 

 

Press ‘OK’ to confirm. 

 

 

 

 

Select the desired language by using the UP and DOWN 

keys.  

 

Press ‘OK’ to confirm. “ 

P

 ” sign appears after the 

selected language. 

 

Press ‘Esc’ to leave the setting. 

Summary of Contents for FlyDect










































































































Reviews: