ESS ES9080Q, Manual, Page: 8 / 18

ES9080Q
Evaluation Board Manual
14/10/2020 7
Register Configuration
ESS Suite GUI
1. Connect to USB and wait for the GUI to detect the bridge device:
2. Select ES9080Q from the I2C Device dropdown
3. Click on the “Controls for I2C Device” button
4. The ES9080Q is now ready to be configured either via single register changes or S2M script:
5. If all registers show as 0xFF or 0xF0, the ES9080Q is not communicating with the AUX Bridge.
Confirm all jumpers match the
Quick Start section and check power supply voltages mentioned
in the Power Supply Options section.