Esprit Tech FALCON-85 SBEC, User Manual

Page: 1 / 12

1
Esprit Tech (1) 321.729.4287
P.O. Box 360815 Support @ EspritTech.com
Melbourne, FL https:// www .espritTech.com
32936, USA
FALCON E
LECTRONIC
S
PEED
C
ONTROLLER
U
SER
M
ANUAL
F
IRMWARE
V
ERSION
1.07
The FALCON product line represents advanced speed controllers for use exclusively in RC airplane models.
With integrated telemetry and various possibilities of optional user configuration, the controllers offer high
efficiency, low weight and precise motor control. The integrated high-power BEC, offering 15Amps of
continuous current, is suitable even for the most demanding applications. The full power of the BEC is available
at any battery voltage within the controller specification (6-51V).
F
EATURES
- Small dimensions combined with high power motor control.
- High power BEC offers 15A continuous current (30A max). BEC overcurrent and overtemperature
protection included.
- BEC voltage setting in 0.1V steps.
- Over- and undervoltage protection, overtemperature protection, motor-stall protection.
- Configurable current limiter.
- Safety shutdown when the throttle impulse is lost.
- Configurable acceleration, timing, electromagnetic brake, motor reversing etc.
- Low acoustic noise due to high frequency switching.
- Automatic telemetry detection: Duplex EX, Hott, MSB, S.Bus2. Alternative firmware with Spektrum
SRXL2 telemetry support.
- Telemetry (RC system dependent): voltage, current, power, capacity, temperature, RPM, energy.
- Telemetry min/max values are logged.
- Configuration through the transmitter or external terminal (JETIBOX/SMART-BOX).
- Firmware updates via USB interface.
- Languages: CZ/DE/EN/FR/IT.
FALCON-85 SBEC
Dimensions 80x30x13.5mm
Weight incl. cables 81g
Continuous current 80A
*
Peak current 120A/2s
*
Supply voltage 6 – 51V
LiPo cells 2 – 12
LiFe cells 3 – 14
Cables battery/motor 4mm
2
/2.5mm
2
Anti-spark circuit No
Recommended connectors G4 (75A), XT90 (90A)
Temperature range -10÷110°C
PWM frequency 20kHz
Operating current 60mA
Standby current 4mA
Propeller positioning With additional Hall-sensor
Telemetry Duplex EX, Multiplex MSB, Graupner Hott,
Futaba S.Bus2, Spektrum SRXL2™
Status LED Yes
Active freewheeling Yes
BEC continuous output current 15A
*
BEC peak current 30A/2s
*
BEC voltage setting 5.5 – 8.4V (0.1V steps)
Optical isolation No
Maximum RPM > 300 000 eRPM (2-pole motor)
External switch voltage Approx. 10V
External switch max. current 30mA
*) Specified values are valid in case sufficient continuous airflow is provided.