28
PROBLEM
CAUSE
SOLUTION
No steam or hot water is obtained.
The coffee-maker needs a lot of time to
make the coffee.
The brewing unit does not fit in place
after it has been removed for cleaning.
No coffee comes out of the outlets.
The coffee flow decreases or the brew-
ing time increases.
Part of the ground coffee may have
been left in the inlet.
The steam nozzle is blocked.
The grind is too fine.
The piston that presses down the coffee
has moved.
The coffee outlet is blocked with dry
coffee remains.
The pipes through which the coffee
comes out of the coffee-maker into the
removal outlet are blocked.
The brewing unit needs to be cleaned.
Use the brush included with the acces-
sories to make the coffee drop or use
the back of the dispensing spoon.
Clean the blocked pipe with a needle.
IMPORTANT!
During this operation,
the steam regulator must be closed and
the coffee-maker turned off.
Select a coarser grind.
Use the brewing unit spanner to posi-
tion the piston in place (as indicated in
section 17. CLEANING AND MAINTE-
NANCE, section B) BREWING UNIT).
Remove the coffee outlet and wash it
under the tap.
Remove the coffee outlet. Clean the
blocked pipe(s) with a needle.
IMPORTANT!
During this operation,
the coffee-maker must be turned off.
Clean the unit as indicated in section 17
CLEANING AND MAINTENANCE.
