6.
Build and Flash
Now you can build and flash the application. Run:
This will compile the application and all the ESP-IDF components, generate
bootloader, partition table, and application binaries, and flash these binaries to your
ESP32 board.
$ idf.py build
Running cmake in directory /path/to/hello_world/build
Executing "cmake -G Ninja --warn-uninitialized /path/to/hello_world"...
Warn about uninitialized values.
-- Found Git: /usr/bin/git (found version "2.17.0")
-- Building empty aws_iot component due to configuration
-- Component names: ...
-- Component paths: ...
... (more lines of build system output)
[527/527] Generating hello-world.bin
esptool.py v2.3.1
Project build complete. To flash, run this command:
../../../components/esptool_py/esptool/esptool.py -p (PORT) -b 921600 write_flash --
flash_mode dio --flash_size detect --flash_freq 40m 0x10000 build/hello-world.bin
build 0x1000 build/bootloader/bootloader.bin 0x8000 build/partition_table/partition-
table.bin
or run 'idf.py -p PORT flash'
If there are no issues, at the end of build process, you should see generated .bin files.
idf.py build