!
2. Configuring for AVS
2.4. Network Configuration
2.4.1. Wi-Fi Networking
1. After successfully downloading the firmware, power on the board again by pressing the
EN button.
2. To configure the network for the first time:
•
Turn on the bluetooth in your phone. Open Espressif’s Alexa programming app and
click on
Provision New Device
. Make sure your phone has internet connectivity.
!
Figure 2-5. Provision New Device
•
The provisioning happens over BLE (Bluetooth Low Energy). Android mandates
applications to have Location permission for accessing BLE. Please provide the
permission when the pop-up shows up.
•
You will see the list of available devices that needs to be provisioned, namely
ESP-
Alexa-WXYZ
. Select the device that you wish to provision.
📖
Note:
Terminal users can follow the flashing instructions as available on the
.
Espressif
!
/17
7
2019.09
