Espow DIVX, User Manual

Page: 9 / 41

- 8
- ——————————————————————————————————————————
Copyright © 2010 www.espow.com
All Rights Reserved
Step 2: Settings
The HD media player defaults that the output to TV set is normal. If you
find any normality, switch to normal display state by pressing the
TV-Mode key on the remote controller.
Please perform the following steps for a HDTV set:
It is recommended you to connect the TV set by the YPbPr AV wire with
green, blue and red lotus form plugs so as to enjoy better AV effect. To
generate sound, you should insert the red and white plugs
(representing right and left sound tracks) of AV wire in the
corresponding interfaces on TV set when you use YPbPr AV wire.
Step 1: Connect the TV set.
Insert the green, blue and red plugs at one end of YPbPr AV wire in
corresponding YPbPr interfaces on TV set, and at the same time insert
the red and white plugs (representing right and left sound tracks) in
corresponding interfaces on TV set, and insert the headset-type plugs
of the two AV wires in YPbPr and AV interfaces of the player.
Take note not to connect the yellow lotus form plug of the AV wire