User
’s
Manual of BTGP-38
K
Bluetooth GPS Receiver V1.0
——————————————————————————————————————————————
Copyright © 2010 www.espow.com
All Rights Reserved
One second a flash
GPS position fixed
Fast flash indicates
Bluetooth in stand-by mode
Blue LED
Slow flash indicates
Bluetooth in connection
Constant on
Indicates: it is under charging
Red LED
Off Charging
is
completed
III Operation Instruction
1. Load battery
Open the cover of battery door, and load the battery in right direction. Close the
battery door...
2. Charge
Plug the AC end of the charger into main power supply socket. Plug the DC
charger into the hole on the product. Then, the red LED turns on, indicating it is
charging. In about 2.5hr, red LED turns off and the charger is completed.
Note: To maximize the lifetime of the battery, please charge it continuously for at least
10 hr for the first time.
3. Set up wireless connection
When power is on, the green LED turns on, indicating the state of location. Blue
LED swiftly flashes, indicating that it enters to matching state. Now, you input search
command on your Bluetooth device (computer, PDA, mobile or laptop etc). When it is
