ESPN X Games Snowboarder, Operator'S Manual

Page: 50 / 50

4) Have another person lift/tilt the Main Cabinet backward while the Platform is slid away
from the Main Cabinet about a foot. Do not lift more than about an inch to prevent
tipping. Set the Main Cabinet back down and unplug the harness from the back of the
Pedestal.
5) Have the other person lift/tilt the Main Cabinet backward again and fully pull the Platform
out from under the Side Rails of the Main Cabinet.
6) At this point easy access can be gained to either the front or rear areas by removing the
¼-20 screws using a T-27 tamperproof tool to allow removal of either the Front or Rear
Access Panels. The below illustration shows just the screws on the right side. The left
side is the mirror image.
7) After servicing the Platform, reverse steps 6 through 2 to reassemble the Pedestal to the
Main Cabinet.