13
13. Never allow children or disabled people to operate the appliance.
14. Warning of the danger of rotating parts.
PARTS
ASSEMBLY
Blower tube installation
Remove bolts (A) and (B). Insert the blower tube
(C) into the blower housing. Replace bolts (A) and
(B) and tighten them as well as screws in the side
of the blower securely. (Fig. 1)
Harness installation
Attach the harness clip to the link in the blower handle. (Fig. 2)
Fig. 1
Fig. 2
1. Rear handle
3. Throttle trigger
4. On/Off-switch
5. Front handle
6. Muffler shield
7. Spark plug
8. Fuel tank cap
9. Starter handle
10. Air filter cover
11. Choke lever
12. Vacuum/blower tube
13. Vacuum/blower slide
14. Primer bulb
15. Harness
16. Collection bag
