15
EN
7. BUILT-IN TIMER
The
Silenplus
pump has an internal clock that can
operate as a start and stop timer, making external
programming unnecessary.
With this function,
Silenplus
can operate entirely in-
dependently.
ATTENTION: the programming and mainte-
nance of the timer is only possible through the
EspaEvopool
app.
7.1 Activating the timer.
DANGER. Electrocution risk.
Never open the
Silenplus
cover without turn-
ing the power supply off at least 5 minutes
beforehand.
Lift the
Silenplus
cover by loosening the 4
screws. (See figure 6)
Activate the Timer using the mini-switch, moving
it to the “ON” position.
Replace the cover and fix it with the 4 screws.
Torque: 0.5 Nm.
7.2. Time setting.
Link
Silenplus
with the external device using Blue-
tooth, following the instructions on the device.
Run the
EspaEvopool
app and follow its indications.
8. MAINTENANCE
ControlSystem:
If
ControlSystem
is not communicating with
Silenplus
it may be necessary to replace the battery.
Proceed as in figure 7.2.
It is a 1.5 V, CR2450 type battery.
Silenplus:
Our
Silenplus
equipment is maintenance free.
The Silenplus time programmer works with a
CR1220 battery. To replace it proceed according to
figure 7.1
Clean the equipment with a damp cloth and without
using aggressive products.
In freezing weather, take the precaution of
emptying the pipes.
If the equipment is going to be inactive for a
long time, you are recommended to dismantle
it and keep it in a dry, well-ventilated place.
WARNING: in case of a breakdown, the
equipment must only be touched by an author-
ised service technician.
The list of official technical services can be found at
www.espa.com.
When the time comes to throw the product away, it
does not contain any toxic or polluting material. The
main components are duly identified so you can dis-
pose of them selectively.
This product or parts of it must be disposed of in an
environmentally sound way, use the waste collection
service. If this is not possible, contact the nearest
ESPA service workshop.
