ESP MS-9, Quick Start Manual

Page: 7 / 10

MS-9 Laser Scanner Quick Start Guide
7
Step 5 —Autoconnect
1. In the Connecting... dialog, if your communications port is not
the default COM1 , use the pull down arrow to change your com-
munications port.
2. Click the Start button.
When connected, the scanner’s settings will be loaded into ESP
and the CONNECTED message will appear in a green box in the
status bar at the bottom right of your screen.
3. If the connection fails, enable a different Com Port , check con-
nections, and try again.
Tip : If you do not see the CONNECTED or DISCONNECTED message
at the bottom of your dialog, try expanding the ESP window horizontally.