2
The requirement to install back up batteries has now been removed from the
latest version of GuardCam. Time and date settings will now be maintained
during mains power outages for a minimum of 72 hours.
The minimum requirements of a PC / Laptop required to provide accurate
reading and re-writing of an SD card used within the GuardCam is as follows:
CPU
Minimum 1GB
RAM
Minimum 2GB
OS
Windows 2000 / XP / Vista / 7
SD card
Must have a capacity of 2GB or higher (maximum 32GB)
Formatting the SD card
It is good practice to Format the SD card using the PC / Laptop you intend
to use for viewing captured images each time any of the following events
occur
After a mains power removal from the GuardCam
When changing the selected image capture option from Video to photo
When changing the selected image capture option from photo to video
After removing the SD card for viewing prior to replacing in the GuardCam
To format the SD card
Please ensure to save any required images to an alternative folder prior
to formatting.
Place it in the SD / USB adaptor supplied
Place the adaptor in a spare USB port on your PC / Laptop
Right click on the SD card location
Select Format
Ensure the correct file system is selected FAT16 ( or FAT ) for SD and
FAT32 for SDHC
Ensure the Quick Format option is NOT selected
Select "Start"
Following these simple points will ensure correct operation of GuardCam and
should be considered as part of its maintenance schedule.
IMPORTANT NOTES - PLEASE READ
GuardCam RF Manual_Layout 2 01/08/2013 09:27 Page 2
