24
of 36
ESP400-10-200L and 300L
8.3.3 Setting the Clock:
The clock can be set in either the standby or running modes. The following example illustrates the procedure
when in running mode:
Press the clock button once. The time will flash. Press the clock button again and the hour segment
will flash. Use the up or down buttons to adjust the hour as necessary then press the clock button to
confirm. The minute segment will then flash. Again, use the up or down buttons to adjust the minutes,
confirming by pressing the Clock button. The date will then flash. Press the clock button again and the
month segment will flash. Adjust as necessary using the same procedure then press the clock button to
confirm. The day segment then flashes and can be adjust. Pressing the clock button once more
confirms the date and the year will then start flashing. Press the clock button again to adjust the year,
confirming with the clock button. The display will revert to normal display:
