background image

33

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL.

<

The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within the 
product’s enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons.

B

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, 

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR 

MOISTURE.

CAUTION

 

o

DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE 
THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE INSIDE.

 

o

IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, 
CONTACT THE STORE WHERE YOU PURCHASED THE UNIT FOR 
A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS 
BEEN REPAIRED.

 

o

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF 
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT 
IN HAZARDOUS RADIATION EXPOSURE.

IN USA/CANADA, USE ONLY ON 120 V SUPPLY.

Model for USA

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of 
the following measures:
•  Reorient or relocate the equipment and/or the receiving 

antenna.

• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for 

help.

CAUTION

Changes or modifications to this equipment not expressly 
approved by TEAC CORPORATION for compliance will void the 
user’s warranty.

Model for Canada

Industry Canada’s Compliance Statement:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme 
NMB-003 du Canada.

China RoHS 

 

o

The information in the following table is only applicable to products for sale in the People’s Republic of China.

 

o

The products sold in the European area are manufactured in accordance with the European RoHS Directive.

*UDQGLRVR 0

Summary of Contents for Grandioso M1













































Reviews: