Preheat Function
The unit features a preheat mode, which shuts down the unit but
continues to supply power to the internal rubidium oscillator. Keeping the
rubidium warm reduces waiting time after the power is turned ON and
enables the unit to provide its full performance immediately.
Superb Chassis Construction for Optimal Performance
Since the high precision nature of the rubidium oscillator makes it delicate
and susceptible to external vibrations, special consideration has been
made in the chassis construction to control these vibrations. The bottom
chassis securing the various components adopts a slit structure to
prevent interference between neighboring components. Furthermore,
the unit features a thick and highly-rigid aluminum panel enclosure and
patented ESOTERIC pin point feet (patent no. 40750477 JP) that minimize
the effect of external vibrations.
Organic EL Display
The unit features a smooth and gorgeous display suitable for a cutting-
edge digital device.
PRINTED IN JAPAN 0117O05
•
TECD-0246
ESOTERIC COMPANY
1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan
Fax: (042) 356-9240
www.esoteric.jp
- This product is available in three different power supply variations shown in the chart above.
Make sure that the voltage shown on the rear panel matches the AC line voltage in your area.
- The shape of the AC inlet and plug of the supplied power cord depends on the voltage rating and destination country.
Please note that Esoteric products are only available from approved distributors in overseas territories.
“ESOTERIC”is a trademark of TEAC Corporation, registered in the U.S. and other countries.
“Grandioso” is a trademark of TEAC Corporation.
©2017 TEAC Corporation. All Rights Reserved. All text, images, graphics and other materials in this catalog are subject to copyright and other intellectual
property rights of TEAC Corporation. These materials may not be directly or indirectly published, reproduced, modified or distributed in any medium.
Other company names and product names in this document are the trademarks or registered trademarks of their respective owners.
Design and specifications are subject to change without notice.
P R O U D L Y M A D E I N T O K Y O
Master Clock Generator
G-01X
Clock outputs
CLOCK OUT
44.1 kHz setting
44.1, 88.2, 176.4, 352.8, 705.6 kHz
1.4112, 2.8224, 5.6448, 11.2896, 22.5792 MHz
48 kHz setting
48, 96, 192, 384, 768 kHz
1.536, 3.072, 6.144, 12.288, 24.576 MHz
Both settings
100 kHz, 10 MHz
Connectors
BNC ×4
Output level
Rectangular wave: TTL level / 75 Ω
10MHz OUT
10 MHz
Connectors
BNC ×4
Output level
Sine wave : 0.5 ± 0.1 Vrms / 50 Ω
Master clock input (EXT IN)
Input frequency
1pps mode
1pps signal (GPS precision or better)
10M mode
10 MHz (GPS precision or better)
Connector BNC ×1
Input levels
10MHz
Sine wave: 0.5–1.0 Vrms/50 Ω
Square wave: TTL level/10 kΩ
1pps signal
Positive pulse: TTL level/10 kΩ
Rubidium oscillator
Until oscillator stabilizes
after power turned on
10 minutes
Frequency stability
Within ±0.1 ppb (-20°C to +65°C)
Frequency precision
Within ±0.05 ppb (when shipped new)(ppb =10
−9
)
General
Power supply
AC 230V, 50Hz
AC 120V, 60Hz
AC 220V, 60Hz
Dimensions (W × H × D)
445 x 131 x 359 mm (17 5/8”× 5 1/4”× 14 1/4”)
(
including protrusions
)
Weight
13.3kg (29 3/8 lb)
Included accessories
Power cord ×1 Felt pads ×3 Owner’s manual ×1 Warranty card ×1
Specifications
P-02X /D-02X
