Esoteric D-02X, Owner'S Manual

Page: 13 / 64

13
En
gl
is
h
Meanings of items shown in setting mode
UPCONV>***
This is the upconversion setting .
Use to select DSD or a multiplier of the input sampling frequency
for upconversion (page 13) .
DSD_F>***
This turns the DSD filter on and off (page 14) .
CLK>***
This is the clock setting .
Use this to set synchronization with an external clock or clock
output to an audio source device that is being synchronized (page
14) .
CLKin>***
This selects the clock input connector (page 15) .
CLK_TH>***
This sets the clock output during clock input mode (page 15) .
DIMMER>***
This sets the dimmer .
You can set the brightness of this unit's display and indicators to
one of four levels (page 15) .
AOUT>***
This sets the analog output . Use this to select the analog output
connector to be used (page 16) .
DPaOFF>***
This sets automatic display darkening (page 16) .
APS>***
This sets automatic power saving (page 16) .
Upconversion setting
UPCONV>***
When a PCM signal from a CD, for example, is input, you can use this
setting to upconvert that signal or convert it to a DSD signal .
Each input connector can have a different setting .
By default, the setting is OFF .
o
During ES-LINK input, only OFF or DSD can be selected .
OFF
Upconversion will not occur .
The original input signal will be sent as is directly to the D/A
converter .
2Fs
The sampling frequency of the input source signal will be upcon-
verted by a factor of 2 from 32, 44 .1 or 48 kHz to 64, 88 .2 or 96 kHz .
4Fs
The sampling frequency of the input source signal will be upcon-
verted by a factor of 4 from 32, 44 .1 or 48 kHz (or 2 from 88 .2 or
96 kHz) to 128, 176 .4 or 192 kHz .
8FS
The sampling frequency of the input source signal will be upcon-
verted by a factor of 8 from 32, 44 .1 or 48 kHz (or 4 from 88 .2 or
96 kHz or 2 from 176 .4 or 192 kHz) to 256, 352 .8 or 384 kHz .
DSD
The digital format of the signal will be converted to DSD .
o
The DSD signal of a Super Audio CD cannot be upconverted .