Esma Inc.
PO Box 734 450 W. Taft Drive
South Holland, IL 60473
708-331-1855 800-276-2466 FAX 708-331-8919
Instructions for
Model E782
Betman Cleaning System
(Cleaner/Rinser/Rinser/Dryer)
Introduction
The Model E782 Cleaning system contains an ultrasonic cleaning tank,
two ultrasonic rinse tanks and a hot air drying chamber. Each
ultrasonic tank and the drying tank have separate control timers. The
ultrasonic tanks are supplied with heaters controlled with internal,
adjustable thermostats.
The ultrasonic cleaning tank 1 is adapted for a pump filter system.
Tanks 2 and 3 are both ultrasonic rinse tanks. Fresh rinse water can be
introduced into the system with the excess cascading to drain.
The E782 unit consists of two components: the main cleaning unit
containing the 316 Stainless Steel tanks housed in a 304 stainless
cabinet and a stainless power module cabinet containing the bulk of the
electronics.
Each tank has 6 potting transducers mounted on the bottom and is
equipped with a ball valve for draining.
The Power Module contains self-tuning modular circuit boards, high
velocity fans to cool the electronics, and an RFI filter to eliminate high
frequency noise feedback.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION AND
OPERATION. If there are any questions, call (800) 276-2466.
INSTALLATION
Place unit on a bench close to a sink or drain. The power module can be
placed up to 8 feet away from tank, either on a shelf or in a cabinet.
The power module should not be positioned where it can be splashed
with liquids, where it can attract dirt or abrasives, or where the air
3
