4
Kongsberg XE
4.2. Site preparation
In the
Site preparation manual
, all information needed for planning and preparing the installation of
the Kongsberg system is available.
All preparations specified in that handbook should be completed before the service engineer arrives
on-site to install the system.
All technical data and requirements about the equipment are available from the
site preparation
manual
.
4.3.
User manuals
User manuals
- availability
From the help menu in iPC,
user manuals
for
cutting table
and iPC are available online. These are
updated regularly.
Factory installed PCs have
All documentation
loaded to
C:\Users\Public\Documents\Esko
documentation
. This folder can also be accessed from the help menu. The content is sorted on
available languages. Please note that some documentation is available in English only.
Note:
For XE machines, which are using XE-Guide, not iPC, please disregard information about iPC.
4.3.1. User manual for cutting table
The
User manual
for
cutting table
contains all information needed about:
• Operator safety.
• How to operate the system.
• How to adjust the system properly.
• System description.
• Daily maintenance.
4.3.2. User manual for iPC
The
User manual for iPC
contains
• iPC system description
• iPC configurations and optimizations
• Preparing and running simple jobs
10
