14
Copy Program Function
Using this thermostat's COPY function is an easy and convenient way to copy the
programming for all four period settings (P1, P2, P3 and P4) from one day to another
instead of programming each day individually.
If you are not already in the program mode, press PROG to enter the program setting mode.
Press DAY to select the day you wish to copy from.
Press COPY; the COPY symbol will appear and the next weekday will flash.
Press DAY to select the day you wish to copy the programs to.
Press COPY again to copy settings for all four program periods; the COPY symbol will disappear
to indicate that the COPY function is complete.
Repeat the above steps to copy the program to another day.
Tip:
If you press COPY 12 times consecutively, the programmed settings will be copied for the entire week.
Press
to enter Program Setting Mode
PROG
Press
to copy all four programming
periods
COPY
Operating Manual
