background image

U46 XL 

ESI

 

 

6

2.2 Rear Panel 

 

External power supply connector (

DC 9V

):

 

 

  If you use a microphone that requires phantom power, especially with a laptop computer, 

it’s strongly recommended to use a DC +9V/500mA adapter (not included). When you 
turn on U46 XL or when you turn on/off phantom power, the current peak level might go 
over 500mA. 

USB

 connector

: Connects the USB cable to the computer. 

MIX OUT

You can monitor all input sources and output sources through the Mix output. Usually, 

you can use Mix out to connect to powered monitor speakers. 

OUTPUT 1~6

You can use these outputs to connect to various external devices with independent 

playback channels or for a 5.1 surround connection. 

INPUT 1~4

:

 The line level inputs for line level sources like tape decks, mixer outputs, phono 

preamps, CD-Players, etc.

 

2.3 Minimum System Requirements 

PC 

Intel Pentium III 600MHz CPU or equivalent AMD CPU 

512 MB RAM 

Direct X 8.1 or higher 

Microsoft Windows XP with Service Pack 2 or higher or Microsoft Windows Vista 32-bit 

one available USB port 

Mac 

Power Macintosh G4 or higher

 

one available USB port 

512 MB RAM 

Mac OS X 10.3 or higher

 

Summary of Contents for U46 XL



















Reviews: