Page 7
Railway
™
Assembly
Step 7: connect power blocks with jumper cable(s) if necessary
One or more jumper cables are used to connect power blocks in two or more rail assemblies. Skip this step if your unit has only one rail assembly.
• Run the jumper cable through the openings in the rail ends and post.
• Insert the connectors on the jumper cable onto the power block in each rail assembly.
• With 3-way configurations, two jumper cables are used. With 4-way configurations, three jumper cables are used.
— Each end of the power block can accommodate two jumper cable connections.
— Refer to the illustrations at the bottom of the page to see how the jumper cables are routed for 3-way and 4-way configurations.
IMPORTANT: Check that each end of the jumper cable is securely connected to the power block.
accommodates two
jumper cable connections
power block
power feed
jumper
cables
jumper
cables
3-way routing
4-way routing
power feed
jumper
cable
