ESI
nEar08 classic
6
Comments
Please also make sure not place any obstacles that may block the flow of air or that could generate
sound reflections (especially highly reflective material including glass or metal) in front of the
speakers. Please do not put pot plants on top or too close to your monitoring speakers.
4. Technical Data
Please note that technical specifications are subject to change without any prior notice. The
specifications given in this manual are up-to-date at the time of the creation of this document.
Specifications
- Type:
2-Way Bookshelf
- LF Driver:
8 inch curved cone with high temperature voice coil and damped rubber surround
- HF Driver:
1 inch neodymiun soft dome tweeter with ferro fluid
- Frequency Response:
40Hz - 24kHz
- LF Amplifier Power:
70W
- HF Amplifier Power:
70W
- S/N Ratio:
> 100dB below full output, 20kHz Bandwidth
- Input Connectors:
1 x XLR Balanced Input Connector
1 x TRS Balanced/ Unbalanced Input Connector
- Polarity:
Positive signal at + input produce outward LF cone displacement
- Input Impedance:
20k ohms balanced,10k ohms unbalanced
- Input Sensitivity:
250 mV input produces full output with Volume control at maximum
- Protection:
RF interference, output current limiting, over temperature, turn on/off
transient, subsonic filter, external mains fuse
- Indicator:
Power ON/OFF indicator on rear panel
- Power Requirements:
Factory programmed for either 115V ~50/60Hz or 230V~50/60Hz;
Power via detachable 3 circuit line cord
- Cabinet:
vinyl laminated MDF
- Dimension:
358 mm(H) x 255 mm(W) x 322 mm(D)
- Net Weight:
10.0 kg/unit (without packing)
- Shipping Weight:
22.0 kg/pair (standard shipping box)
