background image

ESI nEar05 

eXperience

 

 

8

 plug wired unbalanced provides the option of leaving the minus open or grounded. 

We recommend that you ground the unused input. 

The TRS input is summed together with XLR input through a balanced input amplifier. So, either 
may be used as an input or mixed together. The input specifications apply to both inputs. 

3. bar code label

 – this label contains the product serial number bar code. 

4. vent port

 –nEar05 eXperience is a vented box speaker system with a vent port on the rear panel. 

Make sure you are not blocking the vent port (i.e. by putting the speaker too close to a wall) or the 
sound colour will be changed. 

5. volume control knob

 – use the volume control knob to set the proper input 

level from the sound source. Make sure to setup the left / right speakers 
accordingly. Please refer to the image on the right to see the input level to match 
your sound source.  

You might also want to refer to the manual of the sound source connecting to the 
input of nEar05 eXperience. Generally-10dBV or +4dBu are the most common 
output levels of semi-professional and professional audio equipment. For example, 
if your sound source outputs with a -10dBV reference level, you should not set the volume control 
knob to more than -10dBV for maximum power. 

6. power switch 

– when you push the power switch, nEar05 eXperience will be turned on, and 

–surprise– it will be turned off when you push the power switch again. 

7. power port with ext. fuse

 – use this connector to plug in the detachable 3-circuit line cord that 

connects to the power outlet. 

8. AC selection

 – you can select either 110V or 230V AC power according to your local 

requirements. Make sure this is selected properly before you switch on nEar05 eXperience for the 
first time or your equipment could be damaged. 

mation 

Trademarks 

ESI, nEar, nEar05 and nEar05 eXperience are tradem

of Ego Systems Inc. and ESI 

Audiotechnik GmbH. Other product and brand names are trademarks or registered trademarks of 

For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at 
www.esi-audio.com

conductor TRS

5. General Infor

arks 

their respective companies. 

Correspondence 

Disclaimer 

All features and specifications subject to change without notice. 

Summary of Contents for nEar05 eXperience











Reviews: