8
Technical Specifications
-Type :
Dual amplified Bookshelf (one side passive)
- LF Driver :
4
inch Polypropylene curved cone
with high temperature voice coil and damped rubber
surround.
-HF Driver :
1 inch magnetically shield natural Silk Dome.
- Frequency Response:
100Hz - 22kHz
- Crossover Frequency:
4.1kHz
- Amplifier Power:
20W x 2
-S/N Ratio:
> 100dB below full output, 20 kHz Bandwidth
-Input Connectors:
2 x TRS Balanced/ Unbalanced Input Connectors (L/R)
-Polarity:
Positive signal at + input produce outward LF cone displacement
- Input Impedance:
20k ohms balanced, 10k ohms unbalanced
- Input Sensitivity:
200 mV input produces full output with Volume control at maximum.
- Protection:
RF interference, output current limiting, over temperature, turn-on/off
transient, subsonic filter, external mains fuse.
-Indicator:
Power ON/OFF indicator on front panel
-Power Requirements:
Factory programmed for either 115V ~50/60Hz, or
230V~50/60Hz
Power via detachable 3 circuit line cord.
-Cabinet:
vinyl laminated MDF
-Dimension:
206mm(H) x 136mm(W) x 149mm(D)
Remarks: Above specifications are subject to change without notice.
