4
LAPTOP TRAY INSTALLATION
If No Monitor Is Attached to the EDGE Monitor Arm:
Remove the VESA Plate from the
VESA Mount
• Press down on the plastic tab to
release the lock.
• Pull the plate upward to remove.
Attach the VESA Plate to the Laptop Tray
• Align the VESA plate holes with the holes on the back of the laptop tray.
Attach the VESA plate using the four laptop tray screws and locknuts
provided.
— There are two sets of four holes on the VESA plate. One set has holes
3.9" (100mm) apart, the other set has holes 3" (75mm) apart. Either set of
holes may be used.
VESA
Plate
1.
2.
VESA
Plate
Laptop
Tray
1
/
8
x
1
/
4
-32
3
/
8
x
1
/
4
-32