Page 5
Step #3: plug the power supply connector into the charging pad
• Plug the barrel connector on the power supply into the port at the rear of the
charging pad.
• Do not plug the power supply into an outlet until after installation is complete.
FlexCharge Hub
Installation
Step #4: install the charging pad onto the monitor arm base assembly
• Place the charging pad over the monitor arm base.
charging pad
Model FCHHUB-K1 shown
(Kata, KataEX).
Step #5: install the rear cover
• Model FCHHUB-ES only:
Refer to the illustrations below and select
the correct rear cover.
— Slide the rear cover for Model FCHHUB-ES onto the charging pad.
• For Models FCHHUB-K1 and FCHHUB-K2, snap the rear cover onto
the charging pad.
rear cover
Model FCHHUB-K2 shown
(Kata2, Kata2-MS)
Edge/Evolve/Sena
Sena2
rear covers for Model FCHHUB-ES
SenaEX
Step #6: power the charging pad
• Plug the power supply into a standard AC outlet.
Summary of Contents for FlexCharge FCHHUB-ES Series
Page 7: ......
