5. Repeat steps 3 - 4 for all temperature events.
6. Press A to accept/confirm temperature events and move
to the next day/block of days.
7. Repeat steps 3 - 6 until all days have been set. Then wait
15 seconds to automatically confirm and return to run
mode or press the
Home
button.
3.4
All Day Setting
1. Switch the slider to
AUTO
.
2. Press the
A
button under the fascia. The display will now
show
AL (All Day)
.
3. Press the
+/–
button to set the temperature (increments
of 0.5°c).
4. The mode will quit by 00.00 that day. Press the
Home
button to cancel and return to Auto Mode.
3.5
Permanent Manual Overrides
1. Switch the slider to
MAN
.
MAN
will appear in the display.
2. Press
+/–
to adjust the temperature to the desired setting.
This will set a constant temperature 24hrs a day.
3. Switch the slider to
AUTO
to revert back to Auto mode.
3.6
Temporary Manual Overrides
1. To temporarily override the Programmable Room
Thermostat status or temperature press the
+/–
buttons
The Programme Events Display (e.g. P1) will no longer
be shown.
2. Press the
+
button to increase the set temperature
in increments of 0.5°c and/or press the
–
button to
decrease the set temperature in increments of 0.5°c.
3. Once the desired temperature is reached (and after
approx. 6 seconds) the time display will be replaced by a
display indicating the time left to the next programme
(the length of time the temporary override will run, if left
unhindered) and the display then alternates between
the time left and the current time. When the next ON/
comfort programme is arrived at, the temporary override
will end and Auto mode is reactivated.
4. Press the
Home
button to cancel this function and
reactivate Run mode.
3.7
Holiday Mode
Holiday Mode saves energy by letting you reduce the
temperature for 1 to 99 days while you are away from home,
resuming normal operation on your return.
To Set the Holiday Mode:
1. Make sure the Programmable Room Thermostat is in
Auto mode. Press the
H
button, underneath the fascia
and the suitcase symbol will appear on the display and
the number of days will flash.
2. Press
+/–
to set the number of days you will be away.
3. Press the
Next
button and the temperature will flash.
Press
+/–
to set the desired temperature.
4. Press the
Next
or
Home
button, or wait 15
seconds to automatically confirm.
5. The number of days chosen will alternate with time symbol
on display and the number of days will count down.
6. Once the countdown has finished the thermostat will
return to normal operation. It may be advisable to set
the Holiday Mode 1 day less so the house is back up to
temperature for your return.
14
15
