ESI ES1247B, User Instructions, Page: 10 / 20

10
The Factory Pre-Set Programme
This Channel Programmer has been designed to be simple
to use, requiring minimal user intervention with a pre-
programmed heating profile.
The pre-set heating times and temperatures will suit most
people
(see table below)
. To accept the factory pre-set
settings, move the slider to
RUN
which will revert the
programmer to Run Mode (the colon (:) in the LCD display
will begin to flash).
If the user changes from the factory-set programme and
wants to return to it, pressing the reset button with a non
metallic pointed tool will return the unit to the factory-set
programme.
N.B. Every time the reset is pressed, the time and date must
be set again (page 15).
Programming the unit
Event Std Time
Econ
Time
Std Time
Econ
Time
W
eek Days
1st ON 06:30 00:00
W
eek
ends
07:30 00:00
1st OFF 08:30 05:00 10:00 05:00
2nd ON 12:00 13:00 12:00 13:00
2nd OFF 12:00 16:00 12:00 16:00
3rd ON 17:00 20:00 17:00 20:00
3rd OFF 22:30 22:00 22:30 22:00
N.B. If 2PU or 2GR is selected, then events 2nd ON and 2nd OFF
are skipped