5
Install Monitor Arms
• Insert the monitor arms into the base assembly.
Carefully align the protrusion on each monitor arm
post with the indented groove on the base.
• Secure each monitor arm by tightening the
pre-installed set screws using the 2mm Allen key.
Adjust the tightness to allow for the desired ease
of monitor arm rotation.
Assemble Slider Plates
• Slide the VESA mount assemblies onto the
slider plates.
— Use the knob screw
to lock the VESA
mount to the slider plate. The knob can
be loosened to allow adjustment of monitor
position.
— Cover the ends of the slider plates with slider
end caps. Secure the end caps with the end
cap locking screw.
Attach Assemblies to Monitor Arms
• Insert the slider plate and VESA mount assemblies onto the monitor arms.
— Align the protrusions on each slider plate post with the indented groove on the monitor arms.
— Secure the assemblies using the 2mm Allen key and the pre-installed set screws. Adjust the tightness to
allow for the desired ease of monitor rotation.
Tighten
Set Screw
Knob Screw
1.
2.
3.
3.
4.
4.
Slider
End
Cap
End Cap
Locking Screw
Slider
Plate
VESA
Mount
Assembly
MONITOR ARM INSTALLATION
EDGE2-MS DUAL MONITOR ARM
Align
with
Groove
Tighten
Set Screws
Installed
Assembly
Align
with
Groove
