Page 1
Amble Safety/warning/parts/features
Please review these instructions before beginning the installation. Check that all the components shown
below were provided with your order. No other parts are required. Do not discard the packaging until
content that the product operates to your satisfaction.
Parts provided
Adjusting illumination
• Rock Amble back and forth for larger, or more
concentrated pools of light.
Amble Classic, Amble Performance, Amble Designer
Safety instructions/warning
• Save these instructions. The light source of this luminaire is not replaceable;
when the light source reaches its end of life the whole luminaire shall be
replaced. Keep product dry.
— Do NOT attempt to open.
— Do NOT short circuit.
• Dimming feature not compatible with external dimmer controls. Performance
of product is dependent upon battery (if applicable) and usage. Optional
USB port is intended for use with mobile devices requiring less than 1.2A.
• About the battery (Designer series)
— Do NOT charge or handle product if it is hot to the touch.
— Do NOT incinerate or expose to temperatures above 130˚F.
— DO NOT SHIP damaged product unless directed to do so.
• Only the Amble Designer Series is equipped with a rechargeable, non-
replaceable Lithium-Ion polymer battery. Initial battery charging is required
before use. Always charge product in an open area away from flammable
materials, liquids and conductive surfaces. Allow 3.5 hours for a full charge.
Charge battery per these instructions, recommended temperature between
40˚F-110˚F. Do not use or charge battery if product appears to be damaged.
power supply
