AA330 ARTICULATING KEYBOARD ARM
PLEASE REVIEW
these instructions before beginning the installation. Check that
all parts needed were provided with your order. Contact your supplier if any
operates to your satisfaction.
PARTS PROVIDED
Articulating Arm (1)
Front Stopper (1)
5
/
8
" Wood Screws (9)
1" Wood Screws (9)
Track (1)
STEP 1: Adhere Track
•
Peel the backing from the adhesive
strips on top of the track.
•
Adhere the track to the
underside
of the work
—
Position the front edge
of the track
1
/
4
" from the
front edge of the work
surface. The front of the
track is the end with
three holes.
•
Rear
Stop
Peel Off
Backing
Press
Firmly
1
/
4
"
surface.
2
CAUTION:
This install requires a power drill. This is
not
a hand tool install.
ADDITIONAL TOOLS REQUIRED
• #2 Phillips Screw Driver Bit
• " Drill Bit
• Drill (For Track Installation Only)
1
/
8