esera automation Windsensor Pro 200 User Manual Download Page 1

 

Art. No. 20020  

 

 

 

All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of 
ESERA-Automation or E-Service GmbH. Errors and technical modification subject to change. 

 ESERA-Automation, E-Service GmbH 2019 

www.esera.de 

20020 V1.0 R1.0  Manual 

Page 1 of 4 

User guide 

Windsensor / Windmill Pro 200 

with pulse output and heating 

 

 

Performance characteristics 

 

Private and professional applications 

 

weather station 

 

Heating for winter operation 

 

Robust connection cable 3m 

 

Lacquering grey hammer finish lacquer 

 

Stainless steel ball bearings and 
screws 

 

Typical fields of application 

 

Protection of awnings, roller shutters 
and slats from gusts of wind 

 

Mounting on 50mm mast  

(antenna mast) 

 

Wall or roof bracket 

 

flat roof mast 

 

Product description 

With the professional wind sensor Pro 200, the current wind speed can be recorded and, e.g. in gusts of wind, the 
information for retracting an awning or raising roller shutters or blinds / slats can be provided via the system 
control.  

The wind sensor Pro 200 is an optimal environmental sensor for recording the wind speed for weather recording 
in weather stations. 

All metal parts of the Pro 200 wind sensor, such as bearings and screws, are made of weather-resistant stainless 
steel and are durable over a long period of time. This makes them suitable for many years of continuous use in 
professional Smart Home operation or building automation. 

Via the sensor interface (S0 interface) impulses are output depending on the wind speed. 4 pulses are output per 
revolution. 4 pulses correspond to a speed of 1m/s.  

The Pro 200 wind sensor has a pulse output and is intended for connection to the 1-Wire S0 counter module (Art. 
No. 11211) or comparable counter inputs.The sensor is weatherproof and has an approx. 3 meter long 
connection cable. A mounting bracket, wall bracket or pole for roof mounting (vertical) are available as 
accessories. 

The energy-saving heating of the wind sensor ensures operation even in winter during snowfall, rain and frost. 

Summary of Contents for Windsensor Pro 200

Page 1: ...formation for retracting an awning or raising roller shutters or blinds slats can be provided via the system control The wind sensor Pro 200 is an optimal environmental sensor for recording the wind speed for weather recording in weather stations All metal parts of the Pro 200 wind sensor such as bearings and screws are made of weather resistant stainless steel and are durable over a long period o...

Page 2: ...nnecting cables ca 3m cable 4 strands Evaluation Pulse output for 1 Wire S0 counter 11211 Dimensions ca 210 mm x 80mm height x width Windmill Ø 160 mm Accessories Mast bracket wall bracket mast for flat roof Scope of delivery Windsensor without mounting bracket 3 Ambient conditions Protection system IP65 Protection class III Temperature Operation 40 C to 125 C 4 Conformity EN 50090 2 2 EN 61000 4 ...

Page 3: ...or in an environment in which flammable gases vapors or dusts are present or may be present 9 Disposal instructions Do not dispose of the device in domestic waste Electronic devices are to be disposed of according to the Directive on waste electrical and electronic equipment WEEE on local authorities and collection points for waste electronic equipment 10 Safety instructions When using products th...

Page 4: ... 11 Warranty ESERA Automation E SERVICE GmbH guarantees that the goods sold at the time of transfer of risk to be free from material and workmanship defects and have the contractually assured characteristics The statutory warranty period of two years begins from date of invoice The warranty does not extend to the normal operational wear and normal wear and tear Customer claims for damages for exam...

Reviews: