![background image](http://html.mh-extra.com/html/esera-automation/11142/11142_user-manual_2426597002.webp)
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change.
ESERA GmbH, ESERA-Automation 2020
www.esera.de
11142 V2.0 R1.0 Manual
Page 2 of 4
3
Technical data
Input/Output:
1 x RJ45 sockets connected in parallel (12VDC, 5VDC, GND and Data)
Input/Output:
7 x push-in terminals (12VDC, 5VDC, GND and Data)
Operating voltage:
12VDC and 5VDC
Operating current:
RJ45 socket max. 500mA, push-in terminals max. 3A
Protection circuits:
Reverse polarity protection for 5V input/output
Temperature, operation: -20°C to +60°C
Humidity:
10 - 92% (non-condensing)
Dimensions:
Housing 112x41x 35 (LxWxH)
Protection class:
III
Housing protection type: IP00
4
Conformity
EN 50090-2-2
EN 61000-4-2, ESD
EN 61000-4-3, HF
EN 61000-4-4, Burst
EN 61000-4-5, Surge
EN 61000-6-1, Interference immunity
EN 61000-6-3, Interference radiation
RoHS
5
Connection plan
Connection, input/output for 1-Wire network
The push-in terminal (X1-X7, screwless terminal) and the RJ45 modular socket (X8) are connected in parallel.
The input signal can be fed to the module at any point.
It is also possible to use the two connectors (X1-X7 and X8) as adapters from network cable to single cable.