6
7
6.
OPERATION
When storing and transporting lithium ion batteries, the battery or batteries must be placed in the RETRON BOX
between the two RETRON cushions. The RETRON cushions are flame retardant and protect the batteries inside
the box from shocks and shaking.
WARNING
When charging batteries, only use one cushion at the bottom of the box and position the batteries on top. Do not
cover the batteries before closing the lid. This will ensure that any heat produced during charging will be dissipated
efficiently.
WARNING
Risk of poisoning and risk to life due to the inhalation of gases formed during combustion!
WARNING
Risk to life due to closing off the flame-retardant grille!
The rear openings on the flame-retardant grille of the RETRON BOX must not be modified in a way that closes off
or seals them either from the inside or the outside!
6.1
INSERTING THE BATTERIES
1.
Move the lever of the snap locks into the ‘open’ position and remove the lid.
2.
Place a RETRON cushion (supplied) inside the RETRON BOX so that it fits snugly on the base of the box.
3.
Place the battery or batteries on the RETRON cushion at the bottom of the box.
4.
When using the box for storing and transporting, place the second cushion on top of the battery or batte
-
ries so that the battery or batteries are sandwiched between the cushions.
5. Do not use the second cushion in the box when charging!
6. Place the box lid on top.
7. When locking the RETRON BOX, make sure that the RETRON cushions are not caught in the locking
mechanism or between the main body of the box and the lid.
8.
Engage the snap locks by moving them into the ‘closed’ position.
CAUTION
Risk of pinching when closing the lid! Do not place hand between the box and the lid!
+
–
Fig. 5: Positioning a battery between the cushions in
the RETRON BOX. When charging, only use the lower
cushion.
Fig. 6: Locking the lid onto the RETRON BOX
