M
AINTENANCE
Replacing the filterbag:
1.
Switch-OFF appliance and unplug from outlet.
2.
Remove hose from suction opening.
3.
Lift metal bottom lock and remove front cover. (Fig. 1)
4.
Remove and dispose of spend filterbag.
5.
Take new filterbag and make sure al creases are folded out. (Fig. 2)
6.
Place new filterbag (arrow pointing up) in housing and close with front
cover and metal bottom lock.
Replacing the (HEPA) micromotorfilter:
1.
Switch-OFF appliance and unplug from outlet.
2.
Remove hose from suction opening.
3.
Lift metal bottom lock and remove front cover.
4.
Remove and dispose of spend filterbag.
5.
Remove and dispose of spend motorfilter.
6.
Press new filter into destined slots on one side of the housing (Fig. 3,4).
(Always place new filter with white, smooth side facing motor)
7.
Press down on other side of the filter, into the slots on the other side of
the housing (Fig 5,6)
8.
Place new filterbag in housing and close with front cover and metal
bottom lock.
ATTENTION: Never use appliance without paper filterbag and (HEPA)
micromotorfilter in place. Never re-use spend filterbags.
Failure to carry out necessary periodic maintenance can significantly reduce
the lifespan of your appliance!
antistatic-esd-solutions.com • [email protected]
Summary of Contents for MUNTZ 555-ESD-S GS
Page 1: ...antistatic esd solutions antistatic esd solutions com sales antistatic esd solutions com ...
Page 7: ...1 2 3 4 5 6 antistatic esd solutions com sales antistatic esd solutions com ...
Page 10: ...NOTES antistatic esd solutions com sales antistatic esd solutions com ...
Page 11: ...NOTES antistatic esd solutions com sales antistatic esd solutions com ...
