Safety Instructions
!
When working with CPCI-PS24 follow the instructions below and read the manual carefully to protect
yourself from injury and the CPCI-PS24 from damage.
!
The device is a built-in component. It is essential to ensure that the device is mounted in a way that can
not lead to endangering or injury of persons or damage to objects.
!
The device has to be securely installed in the CPCI rack before commissioning.
!
Protect the CPCI-PS24 from dust, moisture and steam.
!
Protect the CPCI-PS24 from shocks and vibrations.
!
The CPCI-PS24 may become warm during normal use. Always allow adequate ventilation around the
CPCI-PS24 and use care when handling.
!
Do not operate the CPCI-PS24 adjacent to heat sources and do not expose it to unnecessary thermal
radiation. Ensure an ambient temperature as specified in the technical data.
!
Do not use damaged or defective cables to connect the CPCI-PS24.
!
Current circuits which are connected to the device have to be sufficiently protected against hazardous
voltage (SELV according to EN 60950-1).
!
The CPCI-PS24 may only be driven by power supply current circuits, that are contact protected.
!
The input of the unit is not internally fused. An external fuse of 8 A is recommended.
!
If the installation requirements are different as listed above, please contact the esd support.
Attention !
Electrostatic discharges may cause damage to electronic components.
To avoid this, please perform the steps described on page 7
before
you touch the CPCI-PS24,
in order to discharge the static electricity from your body.
Qualified Personal
This documentation is directed exclusively towards personal qualified in control and automation engineering.
The installation and commissioning of the product may only be carried out by qualified personal, which is
authorized to put devices, systems and electric circuits into operation according to the applicable national
standards of safety engineering.
Conformity
The CPCI-PS24 is an industrial product and meets the demands of the EU regulations and EMC standards
printed in the conformity declaration at the end of this manual.
Warning:
In a residential, commercial or light industrial environment the CPCI-PS24 may cause radio
interferences in which case the user may be required to take adequate measures.
Intended Use
The intended use of the CPCI-PS24 is the operation as 24 V-power supply module in a CPCI system.
The guarantee given by esd does not cover damages which result from improper use, usage not in
accordance with regulations or disregard of safety instructions and warnings.
!
The CPCI-PS24 is intended for installation in a CPCI only.
!
The operation of the CPCI-PS24 in hazardous areas, or areas exposed to potentially explosive materials
is not permitted.
!
The operation of the CPCI-PS24 for medical purposes is prohibited.
Service Note
The CPCI-PS24 does not contain any parts that require maintenance by the user. The CPCI-PS24 does not
require any manual configuration of the hardware.
Disposal
Devices which have become defective in the long run have to be disposed in an appropriate way or have to
be returned to the manufacturer for proper disposal. Please, make a contribution to environmental protection.
Page 4 of 16
Hardware Manual • Doc. No.: I.2301.21 / Rev. 1.0
CPCI-PS24