Safety Instructions
● When working with CAN-DP/2, CANopen-DP/2 follow the instructions below and read the manual carefully to protect
yourself from injury and the CAN-DP/2, CANopen-DP/2 from damage.
● Do not open the housing of the CAN-DP/2, CANopen-DP/2.
● Never let liquids get inside the CAN-DP/2, CANopen-DP/2. Otherwise, electric shocks or short circuits may result.
● Protect the CAN-DP/2, CANopen-DP/2 from dust, moisture and steam.
● Protect the CAN-DP/2, CANopen-DP/2 from shocks and vibrations.
● The CAN-DP/2, CANopen-DP/2 may become warm during normal use. Always allow adequate ventilation around the
CAN-DP/2, CANopen-DP/2 and use care when handling.
● Do not operate the CAN-DP/2, CANopen-DP/2 adjacent to heat sources and do not expose it to unnecessary thermal
radiation. Ensure an ambient temperature as specified in the technical data.
● Do not use damaged or defective cables to connect the CAN-DP/2, CANopen-DP/2 and follow the CAN wiring hints in
chapter: "Correctly Wiring Electrically Isolated CAN Networks".
● In case of damages to the device, which might affect safety, appropriate and immediate measures must be taken, that
exclude an endangerment of persons and objects.
● Current circuits which are connected to the device have to be sufficiently protected against hazardous voltage (SELV
according to EN 60950-1).
● The CAN-DP/2, CANopen-DP/2 may only be driven by power supply current circuits, that are contact protected.
A power supply, that provides a safety extra-low voltage (SELV or PELV) according to EN 60950-1, complies with this
conditions.
Qualified Personal
This documentation is directed exclusively towards personal qualified in control and automation engineering.
The installation and commissioning of the product may only be carried out by qualified personal, which is
authorized to put devices, systems and electric circuits into operation according to the applicable national
standards of safety engineering.
Conformity
The CAN-DP/2, CANopen-DP/2 is an industrial product and meets the demands of the EU regulations and
EMC standards printed in the conformity declaration at the end of this manual.
Warning:
In a residential, commercial or light industrial environment the CAN-DP/2, CANopen-DP/2 may
cause radio interferences in which case the user may be required to take adequate measures.
Intended Use
The intended use of the CAN-DP/2, CANopen-DP/2 is the operation as PROFIBUS-DP-CAN/CANopen-
Gateway.
The guarantee given by esd does not cover damages which result from improper use, usage not in
accordance with regulations or disregard of safety instructions and warnings.
● The CAN-DP/2, CANopen-DP/2 is intended for indoor installation.
● The operation of the CAN-DP/2, CANopen-DP/2 in hazardous areas, or areas exposed to potentially
explosive materials is not permitted.
● The operation of the CAN-DP/2, CANopen-DP/2 for medical purposes is prohibited.
Service Note
The CAN-DP/2, CANopen-DP/2 does not contain any parts that require maintenance by the user.
Unauthorized intervention in the device voids warranty claims.
Disposal
Devices which have become defective in the long run have to be disposed in an appropriate way or have to
be returned to the manufacturer for proper disposal. Please, make a contribution to environmental protection.
Page 4 of 34
Hardware Manual • Doc. No.: C.2907.21 / Rev. 1.1
CAN-DP/2, CANopen-DP/2
