N O T E
The information in this document has been carefully checked and is believed to be entirely reliable.
esd
makes no warranty of any kind with regard to the material in this document, and assumes no
responsibility for any errors that may appear in this document. In particular descriptions and
technical data specified in this document may not be constituted to be guaranteed product features
in any legal sense.
esd
reserves the right to make changes without notice to this, or any of its products, to improve
reliability, performance or design.
All rights to this documentation are reserved by
esd
. Distribution to third parties, and reproduction
of this document in any form, whole or in part, are subject to
esd
's written approval
.
© 2016 esd electronic system design gmbh, Hannover
esd electronic system design gmbh
Vahrenwalder Str. 207
30165 Hannover
Germany
Phone:
+49-511-372 98-0
Fax:
+49-511-372 98-68
E-Mail:
Internet:
This manual contains important information and instructions on safe and efficient
handling of the PMC-CAN/400-4. Carefully read this manual before commencing any
work and follow the instructions.
The manual is a product component, please retain it for future use.
Trademark Notices
CANopen® and CiA® are registered community trademarks of CAN in Automation e.V.
VxWorks® is a registered trademark of Wind River Systems, Inc.
Linux® is the registered trademark of Linus Torvalds in the United States and/or other countries.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
QNX® and Neutrino® are registered trademarks of QNX Software Systems Limited, and are registered trademarks
and/or used in certain jurisdictions.
All other trademarks, product names, company names or company logos used in this manual are reserved by their
respective owners.
Page 2 of 29
Hardware Manual • Doc. No.: C.2047.21 / Rev. 1.3
PMC-CAN/400-4