Technical Data
4.2 CAN Interface
Number of CAN
interfaces
I-Repeater:
2
Y-Repeater:
3
(in ‘-opto’ design network 1 is electrically isolated from the other units,
network 2...3 share reference potential to 24 V power supply)
Arbiter
PLD
Physical Layer
High-speed CAN interface according to ISO 11898-2, without further
capacitive circuitry,
bit rate up to 1 Mbit/s
Reduction of
attainable total line
length by inserting
the CAN-Repeater
approx. 14 m
CAN termination
integrated in repeater, 120 Ω each!
Table 4:
Data of the CAN interface
CAN-Repeater
Hardware Manual • Doc. No.: C.1330.21 / Rev. 1.4
Page 13 of 28
