14 |
P a g e
GPS Filter (TrueLock)
RedLine 360c is equipped with a TrueLock GPS Filter to store and lock out, or ignore, fixed
location false alerts in its memory. Common sources of fixed location false alerts are storefront
automatic door openers and motion sensors. The TrueLock GPS Filter will not lock out moving
false alerts that are commonly caused by vehicle’s blind spot monitoring and collision
avoidance systems.
Locking Out False Alerts
To manually lock out a fixed location false alert
(X band, K band or laser only), press the MUTE button three times during an alert. Pressing
the first time will silence the audio. Pressing a second time will generate a prompt on the
display that
will read “Lockout?” Press a third time to confirm you want to lock this signal
out by location and f
requency. A “Stored” message will be displayed. Once a signal has been
stored, RedLine 360c will not audibly alert the next time you approach this area but will
display the locked-out alert in grey.
Locked Out Alert
To unlock a signal that has already been stored, simply press the MUTE button twice while
receiving the locked out alert. The display will read “Unlock?” when pressing MUTE the
first time. Press the MUTE button again to unlock it from memory. The display will read
“Unlocked” to confirm your action.
Note: When the GPS Filter is set to OFF, you do not have access to RedLine 360c
’s other GPS
-
enabled features (e.g., Defender Database alerts, marking locations, etc.).
AutoPower
This feature automatically turns off RedLine 360c after a set period of time to save unnecessary
drain on your battery. This is especially useful if your vehicle has a constant-power ignition. To
turn RedLine 360c on again you must press the power button.
Note: If AutoPower is on, to save screen life the display screen goes blank after 30 minutes
without moving. The display screen will turn on automatically after you reach 10MPH.
Band Enables
In the factory default setting the suggested radar and laser bands for North America are
monitored and sources of some common false alerts are rejected. It is highly recommended
that you use your RedLine 360c in this mode.
If you modify Band Enables then this setting will show Modified. The RedLine 360c will also
notify you during the startup sequence with an audible alert, and associated text message
stating which bands have changed from the factory default settings.
WARNING: Do not turn off any bands unless you are absolutely certain there are no traffic radar
guns using that specific band in your area.
