![background image](http://html1.mh-extra.com/html/escort/passport-9500i/passport-9500i_owners-manual_2426293003.webp)
Quick Reference Card
1
Preferences Details
Restoring the Factory Default Settings
To restore your PASSPORT to its original
factory settings, press and hold the
“SEN” and “BRT” buttons while turning
the power on. A
GZhZi
message will
be displayed, accompanied by an
audible alert, acknowledging the reset.
PASSPORT 9500i
Quick Reference Card
Remove card along perforations
R
em
ov
e ca
rd
a
lo
ng
p
er
fo
ra
tio
ns
There are 9 user-selectable options so you
can customize your 9500i for your own
preferences.
The buttons labeled “MRK” and “BRT”
are also used to enter the Preferences
Mode, REVIEW your current Preferences
settings, and to CHANGE any settings as
desired. The words “PREF,” “MRK” and “BRT”
are located on the top of the detector.
How to use EZ-Preferences
1 To enter Preferences, press and
hold the “MRK” and “BRT” buttons
down for 2 seconds.
The unit will beep
twice, and will display the word
EgZ[h
.
2 Then press the “BRT” button to
review the categories.
You can either
tap the button to change categories, or
simply hold the button down to scroll
through the categories.
3 Press the “MRK” button to change
any setting.
You can either tap the
button to change from setting to setting,
or hold the button down to scroll through
all the options.
4 To exit Preferences, simply wait 8
seconds without pressing any button,
or press the power button.
The unit will
display
8dbeaZiZ
, beep 4 times, and
return to normal operation.
An example:
Here is how you would turn PASSPORT’s
AutoMute feature off:
1
Enter the Preferences Mode by holding
both the “MRK” and “BRT” buttons down
for 2 seconds.
PASSPORT will beep twice
and display
EgZ[h
.
2
Then hold the “BRT” button down.
PASSPORT will scroll through the categories,
starting with Pilot (
E^adi
), then
SpeedAlert (
h6agi
), then Power-on
sequence (
ElgDc
), then Signal Strength
meter (
BZiZg
), and then AutoMute
(
VBjiZ
).
3
Release the “BRT ” button when
PASSPORT displays the AutoMute item.
Since the factory setting is for AutoMute to
be on, PASSPORT will display
VBjiZDC
.
(If you accidentally don’t release the
“MRK” button in time, and PASSPORT goes to
the next category, simply hold the “MRK”
button down again, PASSPORT will scroll
through all of the categories. Once you’re
back to your desired category, release the
“MRK” button.)
4
Press the MRK ” button to change from
VBjiZDC
to
VBjiZD;;
.
5
To exit Preferences, simply wait 8
seconds without pressing any buttons, or
press the power button.
PASSPORT will
display
8dbeaZiZ
, beep 4 times, and
return to normal operation.
Summary of Contents for Passport 9500i
Page 34: ...32 Remove card along perforations ...
Page 37: ......