5
The easiest method to hardwire Entourage CIS is as follows:
•
Using the automotive test light, identify a
non-switched 12V / 24V wire
(a wire not controlled by the ignition key).
Please note:
Entourage CIS
consumes up to 1A peak current in very short bursts.
•
Disconnect the negative connection to the vehicle’s battery
•
Route the positive wire to the non-switched 12V / 24V wire
•
Route the negative wire to a vehicle ground wire (or chassis ground)
•
Place one of the supplied wiring taps over the vehicle’s
non-switched 12V / 24V wire
•
Insert Entourage CIS’s
un-stripped positive wire
into the wiring tap
(see #1 in illustration)
•
Use pliers to
compress the U-contact blade
, connecting the two wires
(see #2 in illustration)
•
Close the hinged top cover until securely latched
(see #3 in illustration)
•
Using the second wiring tap, repeat the same process for the ground wire
1
2
3
Entourage CIS
Wire
Vehicle Wire
Summary of Contents for Entourage CIS
Page 1: ...InstallationGuide GPS vehicle security recovery and location awareness ...
Page 2: ......
Page 12: ...DOC 0052 AA ...
