Available options for the ESCO TSC-1005 intercom
___________________________________________________________________________________
Deluxe horn speaker
Model #SPK-1001 ESCO #0216-0003
7.0"H x 10.7"W x 9.1"D
8 Ohm, 15 Watt. Wide angle paging projector. Molded ABS horn and zinc die cast universal swivel mount. Indoor or
outdoor applications
Economy horn speaker
Model #SPK-1002 ESCO #0216-0002
5.75"H x 5.25"W x 6.50"D
8 Ohm, 10 Watt. Molded plastic horn, steel tilt mounting bracket. Indoor or outdoor use.
3.25" pump speaker
Model #SPK-1012 ESCO #0216-0008
3.44"W x 1.35"H
8 Ohm, 3 Watt, 7 Watt MAX. Solder terminals. Dust, smoke & moisture resistant.
Speaker/call box
Model #SPK-1003 ESCO #0941-0006
5.25"H x 7.5"W x 2.0"D
Polished stainless steel enclosure with rain lip. Momentary push-button for call. 8 Ohm, 3 Watt, 7 Watt MAX, dust &
moisture resistant speaker. 1 rear & 1 bottom dual size conduit knockout. Internal terminal strip for wiring.
Call switch box
Model #SPK-1005 ESCO #0941-0007
4.5"H x 2.75"W x 2.25"D
Standard industrial single gang box enclosure. Suitable for wet locations. Red momentary push button for call.
Speaker box
Model #SPK-1009 ESCO #0941-0009
Polished stainless steel enclosure with rain lip. 8 Ohm, 3 Watt, 7 Watt MAX, dust & moisture resistant speaker. 1 rear &
1 bottom dual size conduit knockout.
8” Pre-assembled ceiling speaker assembly with volume control
Model #SPK-1019 ESCO #0216-0040
8” 10 ounce dual cone speaker, 8 ohm impedance with a premounted dual voltage 10 watt line matching transformer.
High impact ABS white grill. Adjustable volume control.
Heavy duty outdoor handset
Model #SPK-1013 ESCO #0941-0002
4.5"H x 4.5"W x 2.25"D (Enclosure only)
Standard industrial dual gang box enclosure. Suitable for wet locations. Standard black handset w/polished armored
cable. Hearing aid compatible receiver per EIA Standard RS-504. Response-200 to 3200 Hz/Sensitivity-minimum 72db
@ 1KHz/Impedance-150 ohms nominal. Internal prewired terminal strip w/location for second external speaker. Handset
on when removed from cradle, second speaker on when handset on cradle. "Call" when handset lifted off cradle.
Impedance matching transformer
Model SPK-1010 ESCO #0204-0080
Four flying leads for installation. Two mounting ears. Necessary when using external music input. Matches five--8 ohm
parallel loads.
Individual speaker volume control:
Model #SPK-1011 ESCO #0205-0008
Single shaft, triple solder lug terminals. 8 Ohm, 25 Watt. Panel or baffle mount.
Shielded speaker wire
Model #SPK-1006 ESCO #0408-0035
20AWG, one pair w/shield, jacketed
Twisted pair speaker wire
Model #SPK-1004 ESCO #0408-0036
20AWG, 2 conductor, jacketed
3