Multi-zone ART Workstation User Manual Rev. 6.0
27
If the Multi-
zone ART Workstation has compartments, after the display shows “TP 37.0”,
the user can see the compartment's temperature
by pressing the (⇧) key. Then the display
will show:
12.3.2 Models with a built-in gas mixer
Soon after system activation, the main display will alternate the reading between the
following parameters. Scroll between the parameters with the
(⇨)
key.
If the O
2
regulator is deactivated,
the system will display “O2 OFF”.
If the Multi-zone ART Workstation has compartments, there will be an additional culture
mode parameter:
If the use mode is Open Culture (no oil or Paraffin overlay culture), the culture
mode shall be set for that and will display: