Multi-zone ART Workstation User Manual Rev. 6.0
16
Table 7.3
Labels on the Multi-zone ART Workstation
Description
Image
PT 1000 validation sensors
PC on/off button
Compartments numbers are indicated in
the top corner of the lid with a label (only
Multi-zone ART Workstation with compart-
ments)
Gas inlet on table plate (only
Multi-zone
ART Workstation
without compartments)
Ethernet
8 Important safety instructions and warnings
8.1 Before installation
1.
Do not use the product if the package is damaged. Contact Esco Medical or the local
representative.
2.
Read the User manual thoroughly before use.
3.
Always keep these instructions easily accessible near the device.
4.
Do not try to lift heavy equipment alone.
5.
If a forklift is used, only lift on the custom-built pallet. The tabletop itself cannot
withstand any lifting in the middle. Permanent damage will occur. Warranty void
if this happens.
6.
The electronics box under the tabletop is not flush with the rest of the underside.
Any blows can result in permanent damage. Warranty void if this happens.
8.2 During installation
1.
Never place this unit on top of other equipment that might heat it.
2.
Place this unit on a flat, hard and stable surface.
3.
Never place the unit on a carpet or similar surfaces.
4.
Do not defeat the safety purpose of the grounding-type (earthing) plug.
5.
A grounding-type (earthing) plug has two blades and a third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician
to replace the outlet.
6.
Always connect the power cord to a properly grounded outlet and only use the
cord that came with the device.