3
INTRODUCTION
If there are any questions regarding the pump or its applications which are not covered in this manual or in other
literature accompanying this unit, please contact your Bombas Esco S/A distributor, or write:
Thomas Pump & Machinery
120 Industrial Drive
Slidell, LA 70460
Ph: 985-649-3000
Fax: 985-649-4300
For information or technical assistance on the power source, contact the power source manufacture’s local
dealer or representative.
The following are used to alert maintenance personnel to procedures which require special attention, to those
which could damage equipment, and to those which could be dangerous to personnel:
This Installation, Operation, and
Maintenance manual is designed to help
you get the best performance and
longest life from your
E
sco pump.
This pump is a
n
LP
Series, semi-open
impeller, self-
priming centrifugal model with a suction
check valve. The pump is designed for
handling mild industrial corrosives, mud or
slurries containing large entrained solids. The
basic material of construction is gray iron,
with ductile iron impeller and steel wearing
parts.
DANGER!
Immediate hazards which WILL result in
severe personal injury or death. These
instructions describe the procedure required
and the injury which will result from failure
to follow procedure.
CAUTION!
Hazards or unsafe practices which COULD
result in minor personal injury or product or
property damage. These instructions describe
the requirements and the possible damage
which could result from failure to follow the
procedure
.
NOTE
Instructions to aid in installation, operation,
and maintenance or which clarify a procedure.
Summary of Contents for LP-12
Page 23: ......