![background image](http://html1.mh-extra.com/html/esco/invt-gd350a-series/invt-gd350a-series_product-manual_2426081370.webp)
GD350A series high-performance multifunction VFD
-365-
VFD model
Input reactor
DC reactor
Output reactor
GD350A-355G/400P-4
Standard
DCL2-400-4
OCL2-350-4
GD350A-400G/450P-4
Standard
DCL2-400-4
OCL2-400-4
GD350A-450G/500P-4
Standard
DCL2-500-4
OCL2-500-4
GD350-500G-4
Standard
DCL2-500-4
OCL2-500-4
Note:
The rated input voltage drop of input reactors is 2%±15%.
The current adjustment coefficient on the input side of the VFD is higher than 90% after a DC
reactor is configured.
The rated output voltage drop of output reactors is 1%±15%.
The preceding table describes external accessories. You need to specify the ones you choose
when purchasing accessories.
D.7 Filters
J10 is not connected in factory for VFD models of 110G/132P and lower. Connect the J10 packaged
with the manual if the requirements of level C3 need to be met;
J10 is connected in factory for VFDs of 132G/160P and higher, all of which meet the requirements of
level C3.
Note:
Disconnect J10 in the following situations:
The EMC filter is applicable to the neutral-grounded grid system. If it is used for the IT grid
system (that is, non-neutral grounded grid system), disconnect J10.
If leakage protection occurs during configuration of a residual-current circuit breaker, disconnect
J10.