ESCO – Equipment Supply Company
15270 Flight Path Drive Brooksville, FL 34604
●
Phone: 800-352-9852
●
Fax: 352-754-4508
Website:
●
Email: [email protected]
Calibration Procedure –
DIGITAL WALL MOUNTED TIRE INFLATOR
Model #10964
NOTE:
Make sure the inflation unit is
disconnected
from the power supply before
starting Step 1.
Step 1:
Connect the inflator
Inlet
to a >100 PSI air source.
Step 2:
Press and hold the Target pressure control buttons (“
+
” and “
–
“) on the faceplate of the
10964 Inflator.
Step 3:
Turn on the inflator and when the LCD display shows “
06A
” code release control
buttons (“
+
” and “
–“)
Step 4:
Press the “
i/SET
” unit option button until the “
CAL
” code is shown on the inflator’s LCD
display.
